WARRANTY
INFORMATION
The
Manufacturer (
Pacific Industries International ) offers a 12 month, or 1 year
warranty on these lighted palm tree products.
Our warranty covers:
All parts of our
lighted palm trees: ( i.e. should a frond go out, due to normal use
during that 1 year time span, we will replace it. (Purchaser pays
for return shipping for quality check and determination of fault under
warranty)
The following
are items (listed but not limited to), which are NOT covered under this warranty:
- Labor
- Acts of God / Mother
Nature (i.e. Hurricanes, Tornados, Excessive Winds, Hail Damage, Wild
Fires, Floods, etc.)
- Animal damage:
(i.e. Mice or other rodents / animals eating through wiring,
burrowing in the product, damage caused by non rodents, etc. )
- And / or other
problems / issues which are not related to the NORMAL use of our
products
THE TECHNICAL POWER RATINGS LISTED BELOW ARE FOR THE
"CASCADE" (
AVERAGE POWER)
MODE, AND FOR THE "FULL ON" (
FULL POWER)
MODE
BE SURE TO USE THE PROPER SIZE WIRE TO
'FEED' YOUR TREE
YOU DO NOT WANT TO OVERLOAD THE CIRCUIT
FOR 16' & 20' TREES A DEDICATED
CIRCUIT IS RECOMENDED
IF YOU ARE UNSURE WHAT SIZE WIRE TO
USE, CONSULT A LOCAL ELECTRICIAN

TECHNICAL DATA FOR THE
LIGHTED PALMS TREES
(see warranty information at top
of page)
9'8" TREE
110 volt average power 1500 watts full
power 2500 watts
10'4" TREE
110 volt average power 1500 watts full
power 2500 watts
12'
TREE
110 volt average power 1500 watts full
power 2500 watts
16'
TREE
110 volt average power 2500 watts full
power 4500 watts
20'
TREE
110 volt average power 2500 watts full
power 4500 watts
TECHNICAL
DATA FOR
THE NEW GENERATION PALMS
(see warranty information
at top of page)
20' TREE
110 volt average power 3500 watts full
power 7500 watts
TECHNICAL
DATA FOR
THE BOTTLE PALM TREES
(see warranty information
at top of page)
9'8" TREE
110 volt average power 1500 watts full
power 2500 watts
10'4" TREE
110 volt average power 1500 watts full
power 2500 watts
TECHNICAL DATA FOR
THE FIREWORKS PALMS
(see warranty information
at top of page)
18' TREE
110 volt average power ?00 watts full
power ?00 watts
23' TREE
110 volt average power ?00 watts full
power ?00 watts
28' TREE
110 volt average power ?00 watts full
power ?00 watts
TECHNICAL
DATA FOR THE CACTI
(see warranty information
at top of page)
3' Tall Cactus
110 volt average power ?00 watts full
power ?00 watts
6' Tall Cactus
110 volt average power ?00 watts full
power ?00 watts
7' Tall Cactus
110 volt average power ?00 watts full
power ?00 watts
10' Tall Cactus
110 volt average power ?00 watts full
power ?00 watts
- - - - - - - - - - -
- - - - - - - - - - -
20" Round Cactus
110 volt average power ?00 watts full
power ?00 watts
27" Round Cactus
110 volt average power ?00 watts full
power ?00 watts
33" Round Cactus
110 volt average power ?00 watts full
power ?00 watts
40" Round Cactus
110 volt average power ?00 watts full
power ?00 watts
60" Round Cactus
110 volt average power ?00 watts full
power ?00 watts
TECHNICAL DATA
FOR THE ROPE LIGHTING
SPECIFICATIONS
AND SAFETY INFORMATION
- All products are UL
Listed
- Sizes: 13mm (1/2 inch) - 2
wire ,
13mm 3 wire, 19mm 1 wire
- Flexible and can be bent into
almost
any shape without breakage
- Water proof: indoor &
outdoor
- Temperature range: -35°C
+
90°C
- UV resistant
- Bulb Life: 20,000 hours
- Voltage: 110v
- Watts: 5.5 / foot
- 150 foot rolls available - custom
sizing available
Important Safety
instructions
- For best results:
Unwind the Neon
Tube lighting and Plug in for approximately 5 minutes to warm up the
lighting. Unplug the Neon Tube Lighting and begin your installation.
- Do not plug in the Neon Tube
lighting
into power source until installation has been completed. While
installing this product insure the rope lighting Does Not Over Lap or
Touch Itself in anyway. The possibility of excess heat may result in
melting the PVC tubing causing an electrical short.
- This product is not recommended
for
use on any flammable items. Example: Around Carpeting, Wooden or
Metal Beds, Furniture, Dressers, Flooring. Avoid contact with materials that
are not heat resistant.
- This product is Not recommended
for
use underwater, around swimming pools, hot tubes, spas or ponds. Not to
exceed 83’ with fused power cord.
- Do not cut or splice. When
connecting
additional Rope Lighting connect end-to-end only.
- Rating & Specifications: Dia:
13mm or approx.1/2 inch, 120 volt, 60Hz, use 5v, 50mA bulb, 0.25
watt/bulb, and 5.5 watt per foot, Temp: -54F to 164F.
WARNINGS
-
Disconnect
from power source when doing any alterations or modification.
-
Do not
plug
into power source until installation is completed.
-
Make sure
the
end cap is firmly secured to the Rope Lighting.
-
Do Not
plug in
while coiled.
-
Do Not use
if
there is any damage to the PVC insulation.
-
Do Not
over
lap or allow this product to touch itself in anyway.